================
Configuring EM
================
Step 1: Create the DN, seems basic, but I created numbers inside the user & logout profiles without defining these DNs.
!
ephone-dn 4 octo-line
number 4000
label Octo-Line 4000
description 4000
!
ephone-dn 5 octo-line
number 4001 no-reg primary
label Line-4001
Step 2: Create the logout Profile & assign it to the Ephone which needs EM Enabled. Without this, EM is not enabled o the phone. Similar to EM Enable Param on UCM.
!
voice logout-profile 1
pin 9999
user 1111 password 1111
number 4001 type normal
!
!
ephone 3
mac-address DC7B.94F8.BF47
ephone-template 1
type 7961
logout-profile 1
Step 3: Create the User Profile, Unlike UCM, the password here is used for login instead of the PIN.
!
voice user-profile 1
pin 1111
user abc password 111
number 4001,4000 type normal
!
Contrary to documentation in CME Admin Guide, I didn't need to create the URL Authentication with the tel-ser to make EM Work.
Very useful but what about the DN assigned to the phone when the use logs out is it the Ephone-DN (4000 in this case) or the number assigned to the logout profile (4001 in this case) ?
ReplyDelete